 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DSS-333 Surface Mount Two-Way Power Divider, 10 - 500 MHz Features * * * * * * * * Fully Hermetic Package Phase Balance: 0.5o Typical Isolation: 40 dB Typical Midband VSWR: 1.05:1 Typical Midband Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1 Watt Max. Internal Load Dissipation: 0.05 Watts Max. MIL-STD-202 Screening Available Rev. V3 SF-1 Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin Configuration Pin No. 1 2 Function IN Output C Pin No. 3 4 Function GND Output D Electrical Specifications1: TA = -55C to +85C Parameter Insertion Loss Isolation Amplitude Balance Phase Balance VSWR Test Conditions Less Coupling -- -- -- All Ports Frequency 10 - 500 MHz 10 - 500 MHz 10 - 500 MHz 10 - 500 MHz 10 - 500 MHz Units dB dB dB Ratio Min -- 25 -- -- -- Typ -- -- -- -- -- Max 0.6 -- 0.15 2 1.4:1 1. All specifications apply with 50 ohm source and load impedance. This product contains elements protected by United States Patent Number 3,428,920. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DSS-333 Surface Mount Two-Way Power Divider, 10 - 500 MHz Typical Performance Curves Rev. V3 Insertion Loss Isolation VSWR Ordering Information Part Number DSS-333 PIN Package SF-1 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of DSS-333PIN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |